Analisis Kerusakan Dan Tebal Lapis Tambah Perkerasan Lentur Ruas Jalan Piru-Loun Kabupaten Seram Bagian Barat

Franklin Tauran; David Daniel Marthin Huwae; Elisabeth Talakua

doi:10.31004/koloni.v3i4.682

Authors

Franklin Tauran Politeknik Negeri Ambon
David Daniel Marthin Huwae Politeknik Negeri Ambon
Elisabeth Talakua Politeknik Negeri Ambon

DOI:

https://doi.org/10.31004/koloni.v3i4.682

Abstract

The Piru-Loun road section of West Seram Regency has a road width of 6m and a road length of 9.35km. The road damage that occurred was 4.35km long starting from STA 5+000 - 9+350. The damage that occurs is that the surface experiences deformation, grain release, cracks, and even holes, the potholes in the road have reached the pavement foundation layer and some even have visible subgrade layers. Technically, road damage indicates a condition where the road is structurally and functionally no longer able to provide optimal services for traffic activities. The aim of this research is to determine the damage and condition of the road, compare the thickness of the flexible pavement overlay and plan the budget (RAB). Damage analysis uses the Bina Marga method and in planning the thickness of the added layer (Overlay), the 1993 Aashto method and the 2017 Road Pavement Design Manual method, which are planning methods for determining the thickness of Indonesian standard pavement layers, the differences between the two flexible pavement methods (Flexible Pavement) will be shows which method is more efficient in application at the damage location. The results of the damage analysis show a priority order value of 5, included in the periodic maintenance program. The result of the added layer thickness using the 2017 Road Pavement Design Manual method was 2.5 cm and the 1993 Aashto method was 5.4 cm. The results of the analysis of the Cost Budget Plan for an added layer thickness of 5.4 cm amounted to IDR 973,858,542.62

References

Atbar Daar, (2019). Perencanaan Peningkatan Perkerasan Lentur Dan Perkiraan Rencana Anggaran Biaya Pada Pembangunan Jalan Maruni-Mameh, Student Journal GELAGAR Vol. 1 No. 1 2019 Program Studi Teknik Sipil S1, ITN Malang.

Hakim Ghaffar, dkk. (2021). Ketebalan Perkerasan Lentur Dengan Metode AASHTO 1993 Dan Manual Desain Perkerasan 2017 . Jurnal Konstruksi Sekolah Tinggi Teknologi Garut Jl. Mayor Syamsu No. 1 Jayaraga Garut 44151 Indonesia.

Hardiyatmo Hary, (2019). Perencanaan Perkerasan Jalan Dan Penyelidikan Tanah, Gadjah Mada University Press, Yogyakarta.

Hendrawan Andi, dkk, (2022). Analisis Kerusakan Jalan Beserta Penanganannya Dan Rab Pada Jl.Raya Gersik-Lamongan, Jawa Timur, Jurnal Kacapuri Jurnal Keilmuan Teknik Sipil Volume 5 Nomor 1 Edisi Juni 2022.

Manoppo Cheryl, (2021) Analisa Perbandingan Desain Lapis Tambah (Overlay) Perkerasan Lentur Dengan Menggunakan Metode Bina Marga 2017 Dan Aashto 1993 (Studi Kasus : Ruas Jalan Yos Sudarso Manado, Nomor Ruas Jalan 5000411), Jurnal Sipil Statik Vol.9 No.4 Juli 2021, Fakultas Teknik Jurusan Sipil, Universitas Sam Ratulangi Manado.

Nur, dkk. (2021).Peremcanaan Perkerasan Jalan, Penerbit Yayasan Kita Menulis, Medan.

Prasetio, dkk, (2020). Studi Perencanaan Perkerasan Lentur Dan Rencana Anggaran Biaya (Pada Proyek Ruas Jalan Karangtalun – Kalidawir Kabupaten Tulungagung), Jurnal Manajemen Teknologi & Teknik Sipil, Fakultas Teknik Universitas Kadiri, Vol 3 No 2.

Siegfried, dkk, (2007). Deskripsi Perencanaan Tebal Perkerasan Jalan Menggunakan Metode AASHTO 1993, University of Yogyakarta (UMY), Indonesia.

Sukirman Silvia, (2010). Perkerasan Lentur Jalan Raya, Bandung, Penerbit Nova.

Wicaksono Joko, (2021). Analisa Kerusakan Jalan Menggunakan Metode Binamarga Dan Perencanaan Lapis Tambahan Menggunakan Metode Aashto, Teras Vol 11 No. 1 Maret 2021, Teknik Sipil Fastikom Unsiq,.